Hardie board on our entire house. FANTASTIC job at an unbelievably low price. Ashton was onsite every day. Above all — unquestionable integrity. They earn the name Patriot's PRIDE.

Siding Replacement in
Dalton, GA
Full-replacement only. James Hardie fiber cement, Everlast composite, Royal and Mastic vinyl, plus stone veneer. Trim, soffit and fascia included. Veteran-owned, manufacturer-direct and lifetime (material & labor) — serving Dalton and Whitfield County with one honest number on a signed timeline.
Siding Replacement for Dalton homes
Across Whitfield County, Patriots' Pride has built its name on a single idea: siding handled by the people who actually do the installing. No marketing-machine markup, no pressure — one fair price on a signed timeline. Dalton is about 27 miles southeast of our Chattanooga headquarters — well inside the area we cover every week, with no trip charge.
Dalton housing runs to historic mill-era homes and bungalows downtown, mid-century ranches and newer construction on the edges — and each of those calls for a different siding approach. Because we're manufacturer-direct on James Hardie, Everlast, Royal, Mastic, we fit the product to your home instead of pushing the one line we're locked into.
Beating summer sun, months of humidity and the wind that comes with spring storms are hard on a home's exterior here. A full James Hardie or composite siding system protects Dalton homes against all three — and won't rot, warp or fade like worn-out cladding.
Dalton neighborhoods we serve
We install siding throughout Dalton, including Tibbs Bridge, Westside, the historic district downtown and the Cleveland Highway corridor. Older historic homes and newer subdivisions alike get the same measured, manufacturer-direct install and the same signed timeline.
What we find on Dalton homes
With 34,417 residents at the 2020 census, Dalton is big enough to have several distinct housing eras sitting side by side.
It was incorporated in 1847, so the oldest parts of town predate balloon framing and standardized window sizes entirely. Nothing there is a catalog fit.
Dalton's housing stock is historic mill-era homes and bungalows downtown, mid-century ranches and newer construction on the edges — and that mix is what decides the scope of a siding job here more than anything on a price sheet.
On Dalton's pre-1940 homes, the starting point is typically original wood siding under several generations of paint, often with lead-bearing layers below.
On Dalton's 1940s-1960s homes, the starting point is typically original wood or early asbestos-cement cladding that is brittle and no longer holds paint.
On Dalton's 2000s and newer homes, the starting point is typically builder vinyl that has faded unevenly on the sun-facing elevations.
Around Tibbs Bridge, Westside, the historic district downtown and the Cleveland Highway corridor, we are usually working on the same handful of eras, so our measurements and lead times are set against homes we have already opened up. A Tibbs Bridge house and a newer build on the edge of town are two different jobs, and we quote them that way.
Because Dalton carries a historic district, exterior changes on some of these homes go through review before work starts. We measure for a unit that satisfies the guideline the first time rather than submitting twice.
- Pre-1940 homes — sash cords that have long since failed, glazing putty that has gone to powder, and rot starting at the sill horns.
- 1940s-1960s homes — frames that conduct heat straight through the wall, winter condensation running down onto the sill, and sashes painted shut.
- 2000s and newer homes — balance hardware and insulated-glass seals reaching end of life at roughly 15 to 20 years, well before the frame looks worn out.
Dalton pricing
In line with the regional average, siding projects in Dalton typically run $12,000 – $25,000 typical. Your exact figure depends on size, product line and configuration — delivered as one honest, itemized number at your free estimate, with 0% and extended financing available.
Permits & Whitfield County
When your siding project requires a permit, we pull it through the Whitfield County building department as part of full service. As a historic-district community, Dalton may require additional review on some homes — we handle that too.
Why Dalton chooses Patriots' Pride
What Dalton homeowners can count on, every job:
- Veteran-owned, 4th-generation installers. The owners are still on the truck — no 10-step pitch, no 2-hour sit-down.
- Manufacturer-direct on every brand: James Hardie, Everlast, Royal, Mastic.
- Signed timeline + lifetime (material & labor) warranty, $2M insured, backed by the Patriot's Promise.
- Hometown Hero: 50% off exterior doors for Dalton-area service members and first responders.
Also in Dalton
Nearby areas we serve
Dalton trusts us.
5.0 stars across 118 verified Google reviews. Best of the Best 2024 & 2025 — Chattanooga Times Free Press.
Kenny gave us all our options for windows and doorwalls, introduced the crew on install day, and did a walk-through after. A few small issues were addressed right away. 100% recommend.
I got estimates from four companies. Patriots' Pride was the least expensive by far. The 7400 series windows were built and installed in less than four weeks. Highly recommend, especially for veterans.
Siding in Dalton, answered.
Siding done
right in Dalton.
Free estimate, signed timeline, owner-led. Serving Dalton, Whitfield County and the wider Georgia market.
